Epson Stylus Pro 3800 - Page 175

Epson Stylus Pro 3800/3800C/3850/3880/3885/3890 Revision C
DISASSEMBLY & ASSEMBLY Disassembly/Assembly Procedure (Group 1) 175
7. Align the fold line of the SHEET, GUIDE, TUBE with that of the CABLE ASSY.,
ASP, and secure them with double-sided tape.
8. Insert the SELECTOR, INK, ASSY into the CARRIAGE, ASSY, and secure it
with the two screws.
 One C.B.P. 2.5 x 8 screw (2 ± 0.5 kgf.cm)
 One C.B.S. 2.5 x 4 screw (2 ± 0.5 kgf.cm)
Figure 4-110. Attaching the SHEET, GUIDE, TUBE
Figure 4-111. Installing the SELECTOR, INK, ASSY
C A U T I O N
When installing the SELECTOR, INK, ASSY., make sure not to
mix up the C.B.P. 2.5 x 8 screw and the C.B.P. 2.5 x 4 screw as they
are similar to each other.
SHEET, GUIDE, TUBE
Double-sided tape
Fold line
SELECTOR, INK, ASSY
C.B.S. 2.5x4
C.B.P. 2.5x8
BOARD ASSY., SUB