Epson Stylus Pro 3800/3800C/3850/3880/3885/3890 Revision C
ADJUSTMENT Standard Adjustment 239
9. Connect a calibrator to the computer, and click [Color Measuring...].
10. Place the calibrator on the calibration base plate, and click [Calibrate].
11. Hold down the button on the side of the calibrator until it beeps. Do not move or
lift the calibrator during pressing the button.
When the calibration is completed normally, the following screen appears
Figure 5-40. i1 Calibrator
Figure 5-41. Calibration Screen
C A U T I O N
Do not contaminate the white plate on the calibration base plate. If
any dirt is observed on the white plate, wipe it off using alcohol.
Button
Base plate
i1 Calibrator
White Plate
To Next Page
Loading...
