Epson Stylus Pro 3800 - Page 240

Epson Stylus Pro 3800/3800C/3850/3880/3885/3890 Revision C
ADJUSTMENT Standard Adjustment 240
12. Make sure that the date and time printed in the second line on the upper left of the
chart (measurable time and date) is within the range displayed under the heading
“GMT” on the lower screen. (If the date and time is not within the range, it is
necessary to print the cart again.)
13. Refer to Figure 5-43, place the chart on black paper (or a sheet) vertically with the
upper part of the chart down, and set the scanning ruler onto the top most patch
line.
Figure 5-42. Measurable Time and Date Check
Figure 5-43. Setting the Chart and the Scanning Ruler
NOTE : The above chart is for Epson Stylus Pro 3880/3885/3890.
2005-04-11 14:44 (GMT 2005-04-11 05:44)
2005-04-18 14:39 (GMT 2005-04-18 05:39)
S/N:0000000000 OS:Win BlackInk:Matte
Printer:EPSON PX-6500
Nozzle check
pattern
Calibration
patch
2005-04-11 14:44 (GMT 2005-04-11 05:44)
2005-04-18 14:39 (GMT 2005-04-18 05:39)
S/N:0000000000 OS:Win BlackInk:Matte
Printer:EPSON PX-5800
Printed date and time
Main unit serial number
Measurable date and time
Product name
OS type Black ink type
Set the scanning ruler with its slot matched with the patch.
Printing
direction