Epson Stylus Pro 3800 - Page 279

Epson Stylus Pro 3800/3800C/3850/3880/3885/3890 Revision C
MAINTENANCE Lubrication 279
[Lubrication 11] [Lubrication 12]
Part Name Guide, Stacker, Right (Board Paper Tray)
Lubrication Point In the groove of the Guide, Stacker, Right. On the both inner sides at
the corner of the groove.
Lubricants G-45
Amount
φ2 mm x 4 mm x 2 points each
Remarks Apply with a syringe. (Pin head:
φ2 mm)
Guide, Stacker, Right
Lubrication
Point
Lubrication
Point
Part Name Torsion Spring, 0.15
Lubrication Point On the Torsion Spring 0.15 at the left side of the Board Paper Tray with
where the SHAFT, PAPER GUIDE, BOARD PAPER contacts
Lubricants G-45
Amount
φ2 mm x 2 mm x 2 points
Remarks Apply with a syringe. (Pin head:
φ2 mm)
Torsion Spring, 0.15
SHAFT, PAPER GUIDE,
BOARD PAPER
Lubrication Point