Epson Stylus Pro 3800 - Page 280

Epson Stylus Pro 3800/3800C/3850/3880/3885/3890 Revision C
MAINTENANCE Lubrication 280
[Lubrication 13] [Lubrication 14]
Part Name Torsion Spring, 0.15
Lubrication Point On the Torsion Spring 0.15 at the right side of the Board Paper Tray
with where the SHAFT, PAPER GUIDE, BOARD PAPER contacts
Lubricants G-45
Amount
φ2 mm x 2 mm x 2 points
Remarks Apply with a syringe. (Pin head:
φ2 mm)
SHAFT, PAPER GUIDE,
BOARD PAPER
Torsion Spring, 0.15
Lubrication
Point
Part Name STACKER, ASSY
Lubrication Point On the SHAFT, STACKER, A with where the STACKER, A contacts
(three points: the left, center, and right)
Lubricants G-26
Amount 1.
φ2 mm x 2 mm x 1 point
2.
φ2 mm x 2 mm x 1 point
3.
φ2 mm x 2 mm x 2 points
Remarks Apply with a syringe. (Pin Head:
φ2 mm)
Left side
Lubrication
Point 1
SHAFT, STACKER, A
Right side
Lubrication
Point 3
STACKER, A
Lubrication Point 2
Center