Epson Stylus Pro 3800 - Menu Settings

Epson Stylus Pro 3800/3800C/3850/3880/3885/3890 Revision C
DISASSEMBLY & ASSEMBLY Disassembly/Assembly Procedure (Group 1) 99
4.3.3.4 HOUSING, FRONT, RIGHT
1. Open the STACKER, C.
2. Remove the screw that secures the HOUSING, FRONT, RIGHT to the main unit.
 One C.B.P. 3 x 8 screw (6 ± 1 kgf.cm)
3. Pull the upper part of the HOUSING, FRONT, RIGHT toward you to release the
upper rib and the two lower tabs, and remove the HOUSING, FRONT, RIGHT.
Figure 4-10. Removing the HOUSING, FRONT, RIGHT
Be sure to engage the two lower tabs with the cutouts, and align the
positioning socket with the rib on the main unit.
rib
hooks
tabs
HOUSING, FRONT, RIGHT
C.B.P. 3x8
STACKER, C