Epson Stylus Pro 3850 - Page 140

Epson Stylus Pro 3800/3800C/3850/3880/3885/3890 Revision C
DISASSEMBLY & ASSEMBLY Disassembly/Assembly Procedure (Group 1) 140
4.3.8.2 BOARD PAPER TRAY
DISASSEMBLY
1. Remove the HOUSING, FRONT, LEFT. (p98)
2. Remove the HOUSING, FRONT, RIGHT. (p99)
3. Remove the STACKER, ASSY. (p134)
4. Push out the BOARD PAPER TRAY while pressing in the middle of the BOARD
PAPER TRAY.
5. Release the TORSION SPRING, 0.15 from the SHAFT, PAPER GUIDE,
BOARD PAPER, and loosen the tension of TORSION SPRING, 0.15 (do this
procedure at both sides).
Figure 4-62. Removing the TORSION SPRING, 0.15
BOARD PAPER
TRAY
SHAFT, PAPER GUIDE, BOARD
PAPER
TORSION
SPRING, 0.15
TORSION
SPRING, 0.15
SHAFT, PAPER GUIDE, BOARD
PAPER