Stylus Pro 4000 Field Repair Guide 4/28/05
Main Board Replacement Printer Component, Software Item, LCD Display, Printer Button Page 55.
13. Write down the IEEE (Firewire) ID, if the Printer’s Parameters are not available.
14. Attach the Board Housing to the Printer and fasten with 6 Screws.
The IEEE ID is located in the
Main Board Cavity
Tilt the Board Assembly, while inserting, so
that the leading edge drops on to the Printer
Mechanism’s Board Support Ledge.
Fasten with 6 Screws
To Next Page
Loading...
