Pro 7900 and 9900 Field Repair Guide 10/6/10
Printer Component, Software Item, LCD Display, Printer Button Page 10.
6. Head Alignment.
PAPER THICKNESS: SELECT PAPER TYPE:
(Photo Paper, Proofing Paper, Fine Art Paper,
Matte Paper, Plain Paper, Others SELECT
THICKNESS: (N)mil
ALIGNMENT: AUTO (UNI-D, BI-D 2-COLOR,
BI-D All, BI-D #1, BI-D #2,
BI-D #3, BI-D #3, BI-D #4)
MANUAL (UNI-D, BI-D 2-
COLOR, BI-D ALL)
7. NETWORK SETUP: (*DISABLE, ENABLE)
IP ADDRESS SETTING: AUTO, PANEL,
BONJOUR: *ON, OFF
INIT NETWORK SETTING: EXECUTE
Note: Manual IP169.254.1.2 Subnet
255.255.0.0 works with most
computers.
5. PAPER SETUP.
ROLL PAPER REMAINING (This Menu is only active
when paper is not loaded and
the Pinch Rollers are closed)
REMAINING PPR SETUP: *OFF, ON:PRINT EVERY
PAGE, ON: AT ROLL EXCHANGE
ROLL PAPER LENGTH: (nnn)ft (REMAINING PPR
SETUP must be on to enable)
ROLL LENGTH ALERT: (nn)ft (REMAINING PPR
SETUP must be on to enable)
PAPER TYPE: Photo Paper, Proofing Paper, Fine Art
Paper, Matte Paper, Plain Paper, Others,
Custom Paper, No Paper Selected
CUSTOM PAPER: Paper NO. (1-10)
PAPER TYPE: Photo Paper, Proofing Paper, Fine Art
Paper, Matte Paper, Plain Paper, Others
PLATEN GAP: NARROW, STANDARD, WIDE,
WIDER, WIDEST
THICKNESS PATTERN: PRINT
PAPER FEED ADJUST: (n.nn)%
DRYING TIME: (n.n)sec
PAPER SUCTION: *STANDARD, -1, -2, -3, -4
SET ROLL PAPER TENSION: *STANDARD, HIGH,
HIGHER
8. OPTIONS SETUP:
SPECTROPROOFER:
STATUS INFORMATION: DEVICE
VERSION, CALIBRATION TILE
SERIAL#, DEVICE TEMPERATURE,
FIRMWARE VERSION, AIR TEM-
PERATURE, BACKING COLOR
Device Alignment: EXECUTE
TAKE UP REEL: Version
To Next Page
Loading...
