Pro 7900 and 9900 Field Repair Guide
CTP Plate Guide Alignment Printer Component, Software Item, LCD Display, Printer Button Page 294.
CTP Plate Guide Alignment
1. Verify that the Plate Guide is attached correctly.
5mm Hex (Allen)
2.5mm Hex (Allen)
Ensure that the Plate Guide is flush
with the Black Plastic Edge of the
Roll Cover.
Note: The Plate Guide installed
flush with the Black
Plastic Edge of the Roll
Cover is the default
position. It is possible that
the Plate Guide’s position
might have to be shifted to
complete the alignment
procedure.
To Next Page
Loading...
