Pro 7900 and 9900 Field Repair Guide 10/6/10
Prime, On or Off Printer Component, Software Item, LCD Display, Printer Button Page 429.
Prime, On or Off
Prime, Initial Fill, and Charge mean the same thing. They all refer to filling the Ink System with ink.
Controlling the Prime function requires Setting, or Resetting the Init.Fill Flag.
Init.Fill: Reset = The Printer is already primed.
Init.Fill: Set = the Printer will prime the next time it is turned on.
1. Press and hold the Down, Right, and Enter buttons and turn on the Printer (Self Testing mode).
2. Using the Down button, navigate to the Parameter menu, and press the Right button.
3. Using the Down button, navigate to the Update menu, and press the Right button.
4. Using the Down button, navigate to the InkParameter menu, and press the Right button
Note: the Printer will always display SET. This does not mean that the Init.Fill Flag is SET.
4.1 Change to Reset, and press the Enter button, to turn off the Prime routine.
4.1.1 The Printer will display Update Param?
4.1.2 Press the Enter button.
4.2 Change to Set, and press the Enter button, to start a Prime routine.
4.2.1 The Printer will display Update Param?
4.2.2 Press the Enter button.
To Next Page
Loading...
