Pro 7900 and 9900 Field Repair Guide 10/6/10
Firmware Update Procedure Using FWUpdate.exe Printer Component, Software Item, LCD Display, Printer Button Page 419.
Firmware Update Procedure Using FWUpdate.exe
Note: This procedure is used to update or install firmware. It is the service method because it does not
require the Printer to be “Online” to work.
1. Turn on the Printer while depressing the Up, Down, Left, and Right buttons.
1.1 The Printer will display UPDATE FIRMWARE
2. Using FWUpdate.exe transmit the current firmware to the Printer.
2.1 The Printer will display UPDATING FIRMWARE.
2.2 The Printer will display FIRMWARE UPDATE COMPLETE.
2.3 The Printer will display ENERGYSTAR.
2.4 The Printer will re-initialize and display EPSON.
2.5 The Printer will display PRESS PAUSE BUTTON.
2.6 The Printer will display PLEASE WAIT.
2.7 The Printer display READY.
To Next Page
Loading...
