1. Printer Status
2. Platen Gap Setting
3. Paper Type and Roll Paper Auto Cut Setting
4. Enabled Options
5. Ink Levels
6. Black Ink Setting
7. Waste Ink Cartridge Level(s)
8. Roll Paper Counter
9. Roll Paper Margin Setting
10. Custom Paper Setting
Maintenance Mode 1: Pause, at power on.
F/W DOWNLOAD MODE: Up, Down, Left, and Right, at power on.
NVRAM (Parameter) Backup Mode: Up, Down, Left, and Right, at power on.
SELF TESTING: Down, Right, and OK, at power on (Hold the buttons until the Ink Cartridge Icons appear).
NVRAM (Parameter) Restore Mode: Disengage 11 Ink Cartridges, remove the 1 (or 2) Maintenance Tank(s),
hold the Up, Down, Left, and Right buttons and turn on the Printer. Wait an additional 20 sec-
onds after the data is transferred to ensure completion.
To Next Page
Loading...
