Pro 7900 and 9900 Field Repair Guide 10/6/10
Ink Bay (Left) Removal Printer Component, Software Item, LCD Display, Printer Button Page 107.
6. Disconnect the Ink Tubes.
1. Remove 2 Screws and disconnect the Tubes.
2. Wrap the Tubes.
Note: The Ink Draining procedure uses air pressure to force
the Ink out of the Ink Lines through the Print Head.
Because of the nature of the hardware the ink in the
Lines is replaced by pressurized air. Opening the Ink
System will result in the escape of the pressurized
air, and a small amount of “ink froth”. Have paper
towels ready to capture the ink.
To Next Page
Loading...
