Epson Stylus Pro 9900 - Page 199

Pro 7900 and 9900 Field Repair Guide 10/6/10
Printer Error Codes (Service) Printer Component, Software Item, LCD Display, Printer Button Page 199.
141A Over Current Error The Cleaning Pump Motor
draws too much current
1. Check the Ink System.
2. Check the Main Board.
141B Over Speed Error The Cleaning Pump Motor
spins too fast.
1. Check the Ink System.
2. Check the Main Board.
141C Rotation Direction Error The Cleaning Pump Motor
spins in the wrong direction.
1. Check the Ink System.
2. Check the Main Board.
141D Driving Time Out Error The Cleaning Pump Motor
does not spin, or spins too
long.
1. Check the Ink System.
2. Check the Main Board.
141E Velocity Deviation Error The Cleaning Pump Motor
spins at irregular speeds.
1. Check the Ink System.
2. Check the Main Board.
141F Under Speed Error The Cleaning Pump Motor
spins too slow.
1. Check the Ink System.
2. Check the Main Board.
1427 CSIC Error The CSIC (Ink Cartridge) is
manufactured for a different
country (market).
Replace the Ink Cartridge with one manu-
factured for the correct country (market).
1428 CSIC Error Sub Board D (CSIC Board)
on one or both of the Ink
Bays is defective.
Replace the defective Sub Board D.
1430 Cartridge Holder Mainte-
nance Error
The Ink Drip Pad located
inside each Ink Bay could
be filled.
1. Replace the Ink Bay
2. Reset the counter (Clear Counter when
replacing Ink holder)
Ink Sys-
tem Error
Codes
Explanation Description Remedy