Pro 7900 and 9900 Field Repair Guide 10/6/10
Printer Error Codes (Service) Printer Component, Software Item, LCD Display, Printer Button Page 203.
1497 Switching Time Out
Error
Switching between PK/MK
does not work
Note: Corrupted or incorrect Parameters
can cause this error. For example:
Selector Sensor set to Photo Black and
the Parameters set to Matte Black.
1. Test the Selector Assembly using the
Self Testing/Mecha Adjusment/Selec-
tor Check function.
2. Install Generic Parameters that match the
Printers current mode (ie: Photo Black
Paramenters on a Printer in photo black
mode etc.)
3. Replace the Damper (Selector) Assem-
bly.
4. Check the Main Board.
149D Driving Time Out Error Switching between PK/MK
takes too long.
1. Replace the Damper (Selector) Assem-
bly.
2. Check the Main Board.
Ink Sys-
tem Error
Codes
Explanation Description Remedy
To Next Page
Loading...
