Pro 7900 and 9900 Field Repair Guide 10/6/10
Cleaning PG Adjustment Printer Component, Software Item, LCD Display, Printer Button Page 288.
Set 2.2 Stop.
1. Enter Self Testing mode: Down, Right, and OK buttons, and turn on the Printer.
2. Navigate to SELF TESTING\Mecha Adjustment\Cleaning PG\Adjustment\
3. Press the Right Arrow to begin the adjustment.
3.1 The Printer will display Please Wait.
4. Select 2.2 Stop.
1. Highlight 2.2 stop.
2. Press the OK button.
3. The Printer will display Please Wait, then complete the adjustment.
To Next Page
Loading...
