Pro 7900 and 9900 Field Repair Guide 10/6/10
Feed Adj(ustment) Printer Component, Software Item, LCD Display, Printer Button Page 301.
4. Measure the pattern.
5. Input the measurements.
5.5 Navigate to SELF TESTING\Mecha Adjustment\Feed Adj\Input: Press the Right Arrow.
5.6 Input the value that was measured in the preceding step. (nn.n)mm: Press the OK button.
Measure the distance between the 2 horizontal lines.
Note: The Feed Adjustment for the 7900 and 9900 is
based on 990.6mm (not 980.0 mm like other
Printers).
To Next Page
Loading...
