Epson Stylus Pro 9900 - Page 42

Pro 7900 and 9900 Field Repair Guide 10/6/10
Cleaning Unit Removal Printer Component, Software Item, LCD Display, Printer Button Page 42.
6. Remove the Waste Tubes from the Maintenance Tank, and wrap them in a paper towel.
3. Wrap the Tubes.
2. Pull off the Tubes.
1. Release 2 Interlocks and move the Waste Tube Fastener up the Tubes.
Note: This White
Nylon Clamp must
be transferred to
the new Cleaning
Unit if the old one is
being replaced.