4. Insert the waste ink tube into the new waste ink bottle and place the bottle in the holder.
Note: Be sure the waste ink tube is inserted in the waste ink bottle or waste ink could spill onto your
product.
5. Lower the ink splash guard onto the waste ink bottle and make sure it firmly seals to the mouth of the
bottle.
Note: If the ink splash guard does not firmly seal, waste ink could spill onto your product.
6. Press the OK button on the product control panel.
7. Press the OK button again to reset the waste ink counter.
Note: If you replaced the waste ink bottle before the replacement message appeared on the control
panel, press the maintenance button and select Waste Ink Counter to clear the waste ink
counter.
Parent topic: Maintenance
Related references
Maintenance Precautions
Consumables and Replacement Parts
121
To Next Page
Loading...
