8. Measure the distance between the + symbols in each test pattern.
9. On the product control panel, press the left or right arrow button to select the distance between the +
symbols for pattern 1 and press the OK button. Repeat this step for pattern #2 if necessary.
After you select the final test pattern number, the control panel returns to its ready status.
Adjusting the Media Feed During Printing
Parent topic: Media Handling
Related references
Media Setup Menu Settings
Adjusting the Media Feed During Printing
Follow the steps here to adjust the feed during printing without printing a test pattern.
1. During printing, press the media feed button.
The product control panel displays an adjustment value.
2. Press the up or down arrow button to adjust the feed depending on these banding results in your
printout:
• If black bands or dark stripes appear, press the up arrow button to increase the feed amount.
44
To Next Page
Loading...
