Parent topic: Media Handling
About the Auto Take-up Reel
The auto take-up reel automatically rolls up printed media as you print.
You can use the auto take-up reel for media with the printable side in (on the left) or printable side out
(on the right).
It is best to do the following when using the auto take-up reel:
• Use media that is 36 inches (91.44 cm) or wider.
• Load media with the printable side in.
• Use a take-up roll core that is the same width as your media so the core does not bend or take up
media incorrectly.
Parent topic: Using the Auto Take-up Reel
Attaching the Take-up Roll Core to the Auto Take-up Reel
Be sure to attach a take-up roll core that is the same width as your media.
49
To Next Page
Loading...
