Printing the Amount of Media Remaining
After you print, you can print the amount of media remaining on the leading edge of the remaining roll.
This lets you enter the number the next time you load the media for the most accurate accounting of the
media remaining on each roll
Note: You must have turned on the Remaining Setup setting on the product control panel to calculate
the amount of media remaining.
1. Make sure your product is ready to print.
2. Press the media setup button, select the Media Remaining setting in the displayed menu, and
press the OK button.
3. Select the Print Remaining Length setting and press the OK button.
4. Press the OK button to print the amount of media remaining.
Parent topic: Media Handling
Related references
Printer Setup Menu Settings
Aligning the Print Head
If your printouts are grainy or out of focus, you need to align the print head. The thickness of your print
media determines the alignment options you select. You can store separate alignment values for each
type of media you use for quick selection.
Before aligning the print head, make sure you have correctly loaded the media you plan to print on.
1. Press the Menu button.
2. Select Media Setup and press the OK button.
3. Press the up or down arrow button to select Customize Settings and press the OK button.
4. Press the up or down arrow button to select the number of the media settings you selected for the
currently loaded media. Then press the OK button.
5. Press the up or down arrow button to select Head Alignment and press the OK button.
6. Press the up or down arrow button to select one of these adjustment methods and press the OK
button:
• If you are printing bidirectionally on your media, select the Manual(Uni-D) setting. If the print
quality has not improved, repeat the steps here and select the Manual(Bi-D) setting.
41
To Next Page
Loading...
