Epson SureColor F7200 - Printer Setup Menu Settings

Printer Setup Menu Settings
The Printer Setup menu lets you control margin settings, automatic cleaning cycles, and other aspects of
your product's operation.
Caution: Follow the instructions in the topic links below the table to use these menu settings correctly.
Setting Options Description
Side Margin(Right) 0.12 to 1.00 inch (3 to 25 Selects the width of the right margin
mm)
Side Margin(Left) 0.12 to 1.00 inch (3 to 25 Selects the width of the left margin
mm)
Print Start Position 0.00 to 32.00 inches (0 to Sets an additional margin on the right
800 mm) side of the media
Margin Between Pages Normal Sets a margin between pages
No Margin/–10 mm to +10
mm
Media Size Check On Automatically detects the edges of the
media. Leave this setting On unless
Off
the printer displays a Media Size Error
when media is loaded correctly.
Media End Check On Automatically detects the end of the
media. Leave this setting On unless
Off
the printer displays Media Out when
media is loaded correctly.
Media Skew Check On Stops printing and displays an error
when skewed media is detected. Leave
Off
this setting On to avoid jams caused by
skewed media.
Media End Option Continue Selects whether to continue an
unfinished print job after a roll is
Stop Printing
replaced
Print Nozzle Pattern Off Selects how often to print an automatic
nozzle check pattern
1 to 10 pages
74