Attaching the Media Guide Bar
Loading Media
Checking for Clogged Print Head Nozzles
Cleaning the Print Head
Adjusting the Media Feeding Unit
Adjusting the Auto Take-up Reel
Attaching the Media Guide Bar
If you removed the media guide bar, follow these steps to attach it to your product.
Caution: Attaching the media guide bar requires at least two people.
1. Locate the two hexagon wrenches that came with your product.
2. Turn off the product.
3. Position the right bracket for the media guide bar as shown, insert the three screws you removed,
and use the large hexagon wrench to tighten them.
139
To Next Page
Loading...
