Setting Options Description
Periodical Cleaning Off Selects the frequency and strength of
automatic head cleaning cycles. Even
Light 1 to 240 hours
when Off is selected, the printer will
Medium
automatically clean the print head at a
fixed interval after printing to keep the
Heavy
nozzles from clogging.
Power
Cleaning Cycle Off Selects the frequency of automatic
head cleaning cycles
1 to 10 pages
Heat Off Timer 15 to 240 minutes Selects the interval before the heater
turns off automatically and the printer
enters sleep mode. In sleep mode, the
control panel also turns off and other
components consume less power.
Restore Settings Yes Returns all items in the Printer Setup
menu to their default settings
No
Parent topic: Using the Control Panel Menus
Related references
Printable Area and Media Size Checking
Related tasks
Checking for Clogged Print Head Nozzles
Cutting Media
Cleaning the Print Head
Maintenance Menu Settings
The Maintenance menu lets you run nozzle checks, cleaning cycles, and other maintenance operations.
You can access the menu directly by pressing the maintenance button.
Caution: Follow the instructions in the topic links below the table to use these menu settings correctly.
75
To Next Page
Loading...
