E
Lower the tension bar.
F
Press the d button to feed the media until the
take up roll core begins to turn.
c
Important:
The auto take-up reel unit will not work if the
tension bar is raised.
Clockwise Take Up
A
Attach the media to the take up roll core.
Tape the media to the take up roll core in the
center and then at the left and right edges.
B
Press the d button in the control panel to feed
enough media for a single wrap around the roll
core.
C
Flip the Auto switch to Off and press the Manual
switch to
to wrap the media once around
the roll core.
D
Flip the Auto switch to .
SC-S30600 Series User's Guide
Basic Operations
38
To Next Page
Loading...
