E
Remove the flushing pad.
Grasp the tab as shown below and lift the pad out
of the printer.
Immediately transfer the used flushing pad to a
tray. Ink may leak from the pad.
F
Insert a new flushing pad.
Insert the two hooks on the flushing pad into the
slots as shown and press the tab down until the
pad clicks into place.
G
Close the maintenance cover and press the Z
button.
H
The menus will close when the print head returns
to its normal position.
SC-S30600 Series User's Guide
Maintenance
62
To Next Page
Loading...
