Error messages What to do
Call For Service
XXXX Error XXXX
Power off and then on. If this doesn’t work,
note the code and call for service.
A call for service occurs when:
❏ The power cable is not connected securely
❏ An error that cannot be cleared occurs
When a call for service has occurred, the printer automatically stops printing. Turn
off the printer, disconnect the power cable from the outlet and from the AC inlet
on the printer, and then reconnect. Turn on the printer again multiple times.
If the same call for service is displayed on the LCD panel, contact your dealer or
EpsonSupport for assistance. Tell them the call for service code is "XXXX".
Call-for-Service Request Error Codes
The portions indicated by asterisks (“*”) vary depending on the type of error.
Carriage error 11**
Media feed error 12**, 15A*, 161*
Circuit error 00**, 13**, 1A**, 1F**, 20**, 3000, Dx**, Fx**
Ink system error 14**,162*
Component has reached end of
service life
110*, 143*
Mechanical error 15**
Heater error 19**
SC-S30600 Series User's Guide
Problem Solver
87
To Next Page
Loading...
