Epson TM-m30II-H User Manual

30
Chapter 2 Setup
Changing to the Front Eject Position
You can change the eject position by replacing the rear cover and the bottom cover. At the time of purchase,
paper is ejected from the top position. When changing to the front eject position, follow the steps below to
replace the covers.
1
Remove the bottom cover and the rear cover.
See the detailed information on "For the top eject position" on page 92.
2
Attach the rear cover and the bottom cover.
See the detailed information on "For the front eject position" on page 95.

Epson TM-m30II-H Specifications

General

Brand	Epson
Model	TM-m30II-H
Category	Printer
Language	English