Epson TM-m30II-H - Functions

49
Chapter 3 Advanced Usage
Functions
Receive buffer capacity
• 4KB (initial setting)
• 45 bytes
BUSY condition
• Receive buffer full/Offline (initial setting)
• Receive buffer full
Auto line feed
• Normally disabled (initial setting)
• Normally enabled
USB power-saving function
• Disabled
• Enabled (initial setting)
Customized Values
Font B auto replacement

Font C auto replacement

Multi-tone print density 
Optional buzzer

Batch rotate print (Upside Down)

Communication condition of USB interface 
Communication condition of Bluetooth interface

Bluetooth communication interval during power
saving mode

• For information about how to use the software setting mode, see "Software Setting Mode" on
pa
ge 65.
• All the
settings are available using the ESC/POS commands.
The receive buffer capacity for the Bluetooth interface is 64 K bytes.
In either case above, the printer enters the BUSY state after power is turned on, and when a self-test
is being run.
Item\Method
TM Utility for iOS,
for Android
TM-m30II Utility
for Windows
Software
Setting Mode