43
Chapter 2 Setup
Setting up from a Windows Computer
Necessary Items
Prepare the following items.
• Computer for setting: Windows 10/8/7
Computer equipped with a wireless LAN function
• Utility for setting: EpsonNet Config or EpsonNet Config (Web version)
Follow the steps below to connect the printer.
1
Turn on the printer.
After starting the printer, check that the "SimpleAP Start" is printed.
If it is not printed, enter the Interface Setup mode and restart the printer in the SimpleAP mode. For
more details, see "Interface Setup Mode" on page 68.
2
Activate Windows Wireless Network Connection and select [EPSON_Printer] as the
connection device on the screen that appears.
If the window to enter a pass phrase appears, enter "12345678”.
Default settings on printer are the following values.
3
When connecting to the printer is complete, setup the Wireless LAN using the
network setup tool, EpsonNet Config or EpsonNet Config (Web version).
For details about EpsonNet Config, see "Setup using EpsonNet Config" on page 58.
For details about EpsonNet Config (Web version), see "Setup using EpsonNet Config (Web version)"
on
page 59.
4
When setting the Wireless LAN is complete, restart the printer.
Network mode SimpleAP mode
SSID EPSON_Printer
Pass phrase 12345678
IP Address 192.168.192.168
To Next Page
Loading...
Need help?
General