Epson TM-m30II-H User Manual

53
Chapter 3 Advanced Usage
Main connection interface
• Auto (interface that receives data first) (initial setting)
• USB
• Bluetooth
• Ethernet/Wi-Fi
• No main connection I/F
Autocutting after closing cover
• Cuts (initial setting)
• Does not cut
Paper reduction
Extra upper space reduction
• Disabled (initial setting)
• Enabled
Extra lower space reduction
• Disabled (initial setting)
• Enabled
Line space reduction rate
• Not reduced (initial setting)
• 25%
• 50%
• 75%
Line feed reduction rate
• Not reduced (initial setting)
• 25%
• 50%
• 75%
• When using this printer with multiple interfaces, make sure the interface that is always
connected to be set as the main connection.
• When using multiple interfaces, set the receive buffer capacity to 4 KB.
• You cannot use wired LAN and wireless LAN at the same time.
• When you do not use the Bluetooth function, set the Bluetooth security level to "Middle" or
"High" to prevent unauthorized access to the printer over Bluetooth. You can change the security
level by using Epson TM Utility, TM-m30II Utility, or in the Interface Setup mode.
• The displayed items vary depending on the interface configuration.
• For information about the function, see "Printing Using Multiple Interfaces" on page 27.

Epson TM-m30II-H Specifications

General

Brand	Epson
Model	TM-m30II-H
Category	Printer
Language	English