Note: This setting can be locked by an administrator. If you cannot access or change this setting,
contact your administrator for assistance.
1. Press the arrow buttons to select Menu and press the OK button.
2. Select System Administration and press the OK button. Enter the administrator password, if
necessary.
3. Select Restore Default Settings and press the OK button.
You see this screen:
4. Select one of these options and press the OK button:
• Network Settings: Resets all network settings.
• Clear All Data and Settings: Resets all control panel settings.
You see a confirmation screen.
5. Press the up arrow button to reset the selected settings. (Press the down arrow button if you want to
cancel the operation.)
Parent topic: Solving Problems
Solving Setup Problems
Check these sections if you have problems while setting up your product.
Product Does Not Turn On or Off
Noise After Ink Installation
Software Installation Problems
Parent topic: Solving Problems
191
To Next Page
Loading...
