Paper Source Available settings Description
Settings option
Rear Paper Feed Normal Select Normal to give printing priority to paper loaded in the
Priority rear paper feed slot
Last
A4/Letter Auto On Select On to switch the selected paper size to match the
Switching loaded paper (Letter or A4) if the wrong size is selected
Off
Auto Select Available paper Select On to include a paper source when the product
Settings sources automatically searches for a paper source to match a print
job
Error Notice Paper Size Notice Select On for either of these settings to display an error
message when the selected paper type or size does not
Paper Type Notice
match the loaded paper
Parent topic: Selecting the Paper Source Settings - Administrator
Selecting Default Paper Settings - Administrator
As an administrator, you can adjust default paper settings that apply to all print jobs sent to the product.
Note: These settings can be locked by an administrator. If you cannot access these settings, contact
your administrator for assistance.
Selecting the Default Printer Settings - Control Panel
Selecting Universal Print Settings
Parent topic: Loading Paper
Selecting the Default Printer Settings - Control Panel
You can change default printer settings using the control panel on the product.
Note: These settings can be locked by an administrator. If you cannot access these settings, contact
your administrator for assistance.
1. Press the Back button, if necessary.
2. Select Menu.
68
To Next Page
Loading...
Need help?
General
