Epson WF-6090 - Changing the Sleep Timer Settings

Related tasks
Changing the Sleep Timer Settings
Changing the Sleep Timer Settings
You can adjust the time period before your product enters sleep mode and turns off the LCD screen.
Note: The Sleep Timer setting in Eco Mode overrides the Sleep Timer setting in Common Settings. This
setting can be locked by an administrator. If you cannot access or change this setting, contact your
administrator for assistance.
1. Press the arrow buttons to select Menu and press the OK button.
2. Select System Administration and press the OK button. Enter the administrator password, if
necessary.
3. Select Common Settings and press the OK button.
4. Select Sleep Timer and press the OK button.
You see a screen like this:
5. Press the up or down arrow button to increase or reduce the number of minutes.
6. Press the left or right arrow button to move the cursor.
7. Press the OK button to exit.
Parent topic: Using Eco Mode
Related tasks
Changing the Eco Settings
23