You see this screen:
2. Select Wi-Fi Direct Setup and press the OK button.
3. Select Connection Setup and press the OK button.
4. Select Change Password and press the OK button.
5. Press the OK button.
Note: If you have already connected devices or computers to your product via Wi-Fi Direct, they will
be disconnected when you change the password. In addition, the NFC tag will be disabled.
6. Enter a new Wi-Fi Direct password using the control panel buttons.
Note: Your password must be at least 8 and no more than 22 characters long.
• To enter letters or symbols, press the up or down arrow buttons to scroll through characters, and
press the right arrow button to select one.
• To enter numbers or change the case of letters, press the Stop button.
37
To Next Page
Loading...
