Epson WF-C5790DWF - Various Ways of Sending Faxes

Related Information
& “Placing Originals” on page 36
& “Polling Send/Board” on page 154
& “Checking the Status or Logs for Fax Jobs” on page 157
Various Ways of Sending Faxes
Related Information
&
“Sending Many Pages of a Monochrome Document (Direct Send)” on page 140
&
“Sending a Fax Preferentially (Priority Send)” on page 140
& “Sending Faxes in Monochrome at a Specied Time (Send Fax Later)” on page 141
& “Sending Dierent Size Documents Using ADF (Continuous Scan(ADF))” on page 142
& “Sending a Fax with a Subaddress(SUB) and Password(SID)” on page 142
& “Sending the Same Documents Multiple Times” on page 143
Sending Many Pages of a Monochrome Document (Direct Send)
When sending a fax in monochrome, the scanned document is temporarily stored in the printer's memory.
erefore, sending a lot of pages may cause the printer to run out of memory and stop sending the fax. You can
avoid this by enabling the Direct Send feature, however, it takes longer to send the fax because the printer
performs scanning and sending simultaneously. You can use this feature when there is only one recipient.
1. Place the originals.
2. Select Fax on the home screen.
3. Specify the recipient.
4. Select the Fax Settings tab, and then tap Direct Send to set this to On.
You can also make settings such as the resolution and the sending method as necessary.
5. Send the fax.
Related Information
& “Placing Originals” on page 36
& “Sending Faxes Automatically Using the Control Panel” on page 135
& “Fax Settings” on page 144
Sending a Fax Preferentially (Priority Send)
You can send an urgent document ahead of the other faxes waiting to be sent.
User's Guide
Faxing
140