Menu Options for Authentication Device Status
Select the menus on the control panel as described below.
Settings > Authentication Device Status
Displays the status of the authentication device.
Menu Options for Epson Open Platform Information
Select the menus on the control panel as described below.
Settings > Epson Open Platform Information
Displays the status of the Epson Open Platform.
Saving Power
e
printer enters sleep mode or turns
o
automatically if no operations are performed for a set period. You can
adjust the time before power management is applied. Any increase will
aect
the product's energy
eciency.
Please
consider the environment before making any change.
Depending on the location of purchase, the printer may have a feature that turns it o automatically if it is not
connected to the network for 30 minutes.
Saving Power - Control Panel
1. Select Settings on the home screen.
2.
Select General Settings > Basic Settings.
3. Do one of the following.
❏ Select Sleep Timer or Power
O
Settings > Power
O
If Inactive or Power
O
If Disconnected, and then
make settings.
❏ Select Sleep Timer or Power O Timer, and then make settings.
Note:
Your product may have the Power
O
Settings or Power
O
Ti m e r feature depending on the location of purchase.
User's Guide
Preparing the Printer
60
To Next Page
Loading...
