Related Information
& “Receiving Faxes by Polling (Polling Receive)” on page 149
& “Setting the Polling Send Box” on page 138
& “Registering a Bulletin Board Box” on page 139
& “Storing a Document in the Polling Send/Bulletin Board Box” on page 139
& “Polling Send/Board” on page 154
& “Storing a Fax Without Specifying a Recipient (Store Fax Data)” on page 143
& “Stored Documents” on page 153
& “Checking the Status or Logs for Fax Jobs” on page 157
& “Checking the Fax Job History” on page 159
Receiving Faxes on the Printer
If the printer is connected to the phone line and basic settings have been completed using the Fax Setting Wizard,
you can receive faxes.
ere are two ways of receiving faxes.
❏ Receiving an incoming fax
❏ Receiving a fax by making a call (Polling Receive)
Received faxes are printed in the printer's initial settings.
You can save received faxes, check them on the printer screen, and forward them. Check with the administrator for
the status of the printer settings. For details, see the Administrator's Guide.
Receiving Incoming Faxes
ere
are two options in Receive Mode.
Related Information
& “While Auto is Selected” on page 147
& “While Manual is Selected” on page 148
While Auto is Selected
is mode allows you to use the line for the following uses.
User's Guide
Faxing
147
To Next Page
Loading...
