Epson WorkForce Enterprise WF-M20590 Series - Using the Manual Staple

❏ Printing using the printer driver (Mac OS)
Select Finishing from the pop-up menu, and then select an option from the Sort setting. If the optional
nisher
unit is installed, select the staple location as necessary. For details on the setting items, see the explanations of
the menu options for the printer driver.
c
Important:
When using the Finisher tray, do not remove your printouts while the print job is still in progress. e print position
may be misaligned and the staple position may move from its original position.
Related Information
& “Menu Options for Copying” on page 50
& “Menu Options for Memory Device” on page 83
& “Finishing Tab” on page 106
& “Menu Options for Finishing” on page 119
Using the Manual Staple
e
optional Finisher Unit has a feature that allows you to staple manually.
is
feature is useful when you forget to
staple the printouts or want to staple the originals.
Number of sheets that can be manually stapled:
e available paper sizes are set and xed when the printer is installed.
For A4 or A3
❏ Paper size: A4
60 to 90 g/m
2
: 50 sheets
91 to 105 g/m
2
: 30 sheets
❏ Paper size: A3
60 to 90 g/m
2
: 30 sheets
91 to 105 g/m
2
: 20 sheets
For Letter or Ledger
❏ Paper size: Letter
60 to 90 g/m
2
: 50 sheets
91 to 105 g/m
2
: 30 sheets
❏ Paper size: Ledger
60 to 90 g/m
2
: 30 sheets
91 to 105 g/m
2
: 20 sheets
User's Guide
Options
127