Epson WorkForce Enterprise WF-M20590 Series - Inserting Separator Sheets

Print Settings
1. On the printer Driver’s Finishing tab, select the method for stacking multiple copies from the Sort setting.
❏ Rotate Sort: Stacks the printouts alternately in the portrait orientation and the landscape orientation when
printing multiple copies.
is feature uses two paper sources. Load paper in the portrait orientation in the paper source, load paper
in the landscape orientation in the other paper source, and then select Auto Select as the Paper Source
setting. Select Auto Select or Face Down Tray as theOutput Tray setting. e printouts are stacked in the
Face Down Tray.
❏ Shi Sort: Osets each set of copies when printing multiple copies. is option is available when the
optional Finisher Unit is installed.
2. If the optional Finisher Unit is installed, select the staple location as necessary.
3. Set the other items, and then click OK.
4.
Click Print.
Related Information
& “Printing Basics” on page 87
& “Finishing Tab” on page 106
Inserting Separator Sheets
You can insert separator sheets between copies or jobs.
Note:
When dierent users send print jobs from the computer, you can also insert separator sheets between users from Settings >
General Settings > Printer Settings > Universal Print Settings > Insert Sheets per User.
Print Settings
1. On the printer driver's Finishing tab, click Separator Sheet next to Paper Source, and then select the method
for inserting separator sheets between printouts.
❏ Insert sheet between copies: Inserts separator sheets between copies.
❏ Insert sheet between jobs: Inserts separator sheets between jobs.
2.
Select the paper source for the separator sheets.
User's Guide
Printing
92