Epson WorkForce Enterprise WF-M20590 Series - Application for Configuring Printer Operations (Web Config); Running Web Config on a Web Browser

& “Installing the Latest Applications” on page 141
Application for Conguring Printer Operations (Web
Cong)
Web Cong is an application that runs in a web browser, such as Internet Explorer and Safari, on a computer or
smart device. You can conrm the printer status or change the network service and printer settings. To use the
Web Cong, connect the printer and the computer or device to the same network.
e following browsers are supported.
OS Browser
Windows XP SP3 or later
Microsoft Edge, Internet Explorer 8 or later, Firefox
*
, Chrome
*
Mac OS X v10.6.8 or later
Safari
*
, Firefox
*
, Chrome
*
iOS
*
Safari
*
Android 2.3 or later Default browser
Chrome OS
*
Default browser
*Use the latest version.
Running Web
Cong
on a Web Browser
1.
Check the printer's IP address.
Tap the network icon on the printer's home screen, and then tap the active connection method to conrm the
printer's IP address.
Note:
You can also check the IP address by printing the network connection report.
2. Launch a Web browser from a computer or smart device, and then enter the printer's IP address.
Format:
IPv4: http://the printer's IP address/
IPv6: http://[the printer's IP address]/
Examples:
IPv4: http://192.168.100.201/
IPv6: http://[2001:db8::1000:1]/
Note:
Using the smart device, you can also run Web Cong from the maintenance screen of Epson iPrint.
Related Information
& “Using Epson iPrint” on page 123
& “Menu Options for Network Settings in General Settings” on page 42
User's Guide
Network Service and Software Information
139