Placing Originals on the ADF
You can copy and scan multiple originals at once.
Available Originals for the ADF
Available Paper Sizes
*
A6 to A3/Ledger (Maximum 297×431.8 mm (11.7x17 in.) )
Paper Type High-quality paper, Plain paper, Recycled paper
Paper Thickness (Weight of Paper) 52 to 128 g/m
Loading Capacity 150 sheets or 16.5 mm (0.65 in.)
*If the width of the original is the same, you can also scan documents with mixed sizes.
❏ A3/A4
❏ B4/B5
❏ Letter/Legal
Even when the original meets the specications for media that can be placed in the ADF, it may not feed from the
ADF or the scan quality may decline depending on the paper properties or quality.
c
Important:
To prevent paper jams, avoid placing the following originals in the ADF. For these types, use the scanner glass.
❏ Originals that are torn, folded, wrinkled, deteriorated, or curled
❏ Originals with binder holes
❏ Originals held together with tape, staples, paper clips etc.
❏ Originals that have stickers or labels stuck to them
❏ Originals that are cut irregularly or not right angled
❏ Originals that are bound
❏ OHPs, thermal transfer paper, or carbon backs
❏ Originals that are just printed out (not dried, not cooled, and so on)
Placing Originals
Tap on the control panel, and then tap How To > Place Originals.
User's Guide
Preparing the Printer
33
To Next Page
Loading...
