1. Display the charm by putting the mouse pointer on the bottom-right of the screen, and then click Settings.
2. Click the connected network icon on the Settings window.
3.
Right-click the connected network on the Network window, and then click Turn sharing on or o on the
displayed menu.
4. Do you want to turn on sharing between PCs and connect to devices on this network? is displayed, select
the answer suitable to your network place. Select Ye s to save the scanned images to the shared folder.
❏ Select Ye s (private network) when connecting to a home network or oce network.
❏ Select No (public network) when connecting to a public network.
Note:
You can check the network place on the Network and Sharing Center.
Changing the Network Place - Windows 7
Note:
Log on as the administrator.
1. Click the start button, and then select Control Panel.
2. Open Network and Sharing Center.
❏ Category view: Select Network and Internet > Network and Sharing Center.
❏ Small icons view: Click Network and Sharing Center.
3. Click the network place in View your active networks.
4. Set the network place.
❏ Select Home network or Work network when connecting to a home or
oce
network.
❏ Select Public network when connecting to a public network.
5.
Check the content, and then click Close.
Other Scanning Problems
Scanning Speed Is Slow
❏ Lower the resolution, and then scan again. When the resolution is high, scanning may take some time.
❏ e scanning speed may be reduced depending on the image adjustment features in Epson Scan 2.
❏ On the Conguration screen which is displayed by clicking the
button in Epson Scan 2, if you set Quiet
Mode on the Scan tab, the scanning speed may be reduced.
Related Information
& “Scanning Using Epson Scan 2” on page 76
User's Guide
Solving Problems
169
To Next Page
Loading...
Need help?
General
