Epson WorkForce Enterprise WF-M20590 Series - Menu Options for Copying; Basic Settings Menu Options for Copying

Menu Options for Copying
Basic Settings Menu Options for Copying
Note:
e items may not be available depending on other settings you made.
Density:
Increase the level of density when the copying results are faint. Decrease the level of density when ink
smears.
Paper Setting:
Select the paper source that you want to use. When Auto is selected, a suitable size is fed automatically
depending on the auto detected original size and the
specied magnication
ratio.
Reduce/Enlarge:
Congures the magnication ratio of the enlargement or reduction. Tap the value and specify the
magnication used to enlarge or reduce the original within a range of 25 to 400%.
❏ Auto
Detects the scan area and automatically enlarges or reduces the original to t to the paper size you
selected. When there are white margins around the original, the white margins from the corner
mark (
) of the scanner glass are detected as the scan area, but the margins at the opposite side
may be cropped.
❏ Reduce to Fit Paper
Copies the scanned image at a smaller size than the Reduce/Enlarge value to t within the paper
size. If the Reduce/Enlarge value is larger than the paper size, data may be printed beyond the edges
of the paper.
❏ Actual Size
Copies at 100 % magnication.
❏ A3→A4 and others
Automatically enlarges or reduces the original to t to a specic paper size.
User's Guide
Copying
50