EasyManua.ls Logo

Epson WorkForce Enterprise WF-M20590 Series - Page 41

Epson WorkForce Enterprise WF-M20590 Series
204 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
PS3 Menu:
Error Sheet
Select On to print a sheet showing the status when an error occurs during PostScript or
PDF printing.
Binary
Select On when printing data that contains binary images. e application may send the
binary data even if the printer driver setting is set to ASCII, but you can print the data when
this feature is enabled.
PDF Page Size
Select the paper size when printing a PDF
le.
If Auto is selected, the paper size is
determined based on the size of the rst page.
Auto Error Solver:
Select an action to perform when a 2-sided printing error or a memory full error occurs.
On
Displays a warning and prints in single-sided mode when a 2-sided printing error occurs, or prints
only what the printer could process when a memory full error occurs.
O
Displays an error message and cancels printing.
Memory Device:
Select Enable to allow the printer to access an inserted memory device. If Disable is selected, you
cannot save data to the memory device with the printer. is prevents condential documents from
being removed illegally.
Thick Paper:
Select On to prevent ink from smearing on your printouts, however, this may lower the print speed. If
you cannot prevent ink from smearing using this feature, try reducing the print density and copy
density.
Quiet Mode:
Select On to reduce noise during printing, however, this may lower the print speed. Depending on
the paper type and print quality settings you selected, there may be no
dierence
in the printer's noise
level.
Optimize Finishing:
Select On to reduce paper misalignment and improve the printer's ability to staple and stack paper.
Using this feature decreases print speed.
Print Speed Priority
Select
O
to allow the printer to match the printing speed to the paper type and print data
conditions. is allows you to prevent print quality from declining and paper jams.
PC Connection via USB:
Select Enable to allow a computer to access the printer when connected by USB. When Disable is
selected, printing and scanning that is not sent over a network connection is restricted.
User's Guide
Preparing the Printer
41

Table of Contents

Related product manuals