1. Place the originals.
Note:
If you want to scan multiple originals, place all of the originals on the ADF.
2. Select Scan on the home screen.
3.
Select Computer (WSD).
4. Select a computer.
5.
Tap
x
.
Related Information
&
“Placing Originals” on page 32
Setting Up a WSD Port
is section explains how to set up a WSD port for Windows 7/Windows Vista.
Note:
For Windows 10/Windows 8.1/Windows 8, the WSD port is set up automatically.
e following is necessary to set up a WSD port.
❏
e
printer and the computer are connected to the network.
❏ e printer driver is installed on the computer.
1. Turn the printer on.
2. Click start, and then click Network on the computer.
3. Right-click the printer, and then click Install.
Click Continue when the User Account Control screen is displayed.
User's Guide
Scanning
74
To Next Page
Loading...
