H
Repeat step 7 for the other groups (#2 to #4).
I
Finish aligning the print head.
Setting/Changing Time and Region
Follow the steps below to set the time and region using the product control panel.
A
Press x to display the menus.
B
Color 2.5-inch display models:
Select Printer Setup.
Monochrome 2-line display models:
Select Maintenance.
C
Select Date/Time.
D
Select the date format.
E
Set the date.
F
Select the time format.
G
Set the time.
Note:
To select daylight saving time, set Daylight Saving Time to On.
H
Select Country/Region.
I
Select the region.
J
Select Yes.
Note:
When the power is left off for an extended period of time, the clock may be reset. Check the clock when you turn the power
back on.
User’s Guide
Maintaining Your Product and Software
108
To Next Page
Loading...
