Paper Jams
Load paper in the correct direction, and slide the edge guides against the edges of the paper.
Related Information
& “Removing Jammed Paper” on page 158
& “Loading Paper in the Paper Cassette” on page 44
Paper Feeds at a Slant
Load paper in the correct direction, and slide the edge guides against the edges of the paper.
Related Information
& “Loading Paper in the Paper Cassette” on page 44
Several Sheets of Paper are Fed at a Time
When several sheets of paper are fed at a time during manual 2-sided printing, remove any paper which is loaded
in the printer before you reload the paper.
Power and Control Panel Problems
Power Does Not Turn On
❏ Make sure the power cord is securely plugged in.
❏ Hold down the
P
button for a little longer.
Power Does Not Turn O
Hold down the
P
button for a little longer. If you still cannot turn o the printer, unplug the power cord. To
prevent the print head from drying out, turn the printer back on and turn it o by pressing the
P
button.
Power Turns O Automatically
❏ Select Settings > Basic Settings > Power
O
Settings, and then disable the Power
O
If Inactive and Power
O If Disconnected settings.
❏ Select Settings > Basic Settings, and then disable the Power
O
Timer Setting.
Note:
Your produc t may have the Power
O
Settings or Power
O
Ti me r feature depending on the location of purchase.
User's Guide
Solving Problems
159
To Next Page
Loading...
